These are systems formed by producing EPDM rolls, EPDM tiles, SBR safe floor coatings, SBR roll rubber product granule rubber parts and EPDM material used for children playgrounds being pressed under high pressure and high temperature with special adhesives. The system is established via pouring material on-site or gluing in the form of moulds. It functions as shock absorber in case of hard falls, produced from ecologic, recyclable material and is resistant to ultraviolet light.
Technical Properties: Products are manufactured from recycled SBR Rubber and EPDM based materials that are resistant to weather conditions while not harmful to human health.
Advantages of Rubber Flooring Materials and Their Superiority against Other Materials:
- Due to preventing injuries that may occur because of falls or impacts thanks to its shock absorbing and protective aspect and elasticity, it is the best material to be chosen especially for children playgrounds.
- Compared to sand used in playgrounds, it is much more hygienic and health.
- Due to its superior drainage property, it does not cause water accumulation even after heavy rains. Provides a dry and antiskid floor.
- Its cleaning is very easy, it is conveniently cleaned after rain or with water. It has long life, and easy to repair due to its demountable characteristic.
- In addition to its elasticity, it is also highly resistant to abrasions and impacts.
- It is a material that reduces loss of energy, does not tire the person and with a significantly high walking comfort.
- Provides heat and noise insulation.
- It is resistant to UV sunlight. No deformation due to low or high temperatures occurs.
- It can be safely used in areas where low temperatures and snow precipitation are encountered.
- Provides a smooth surface, does not contain protrusions-indentations that may cause tripping. After form, thickness, colour, model etc. product properties are determined, initially surface preparation is conducted. After a smooth and flat concrete surface is obtained, adhesive material is applied to the concrete surface via vinyl comber, and coating process is initiated by laying the material on that surface. You may reach detailed technical information regarding application from our company.
- The rubber flooring material to be used on children playground floors should be produced by UV resistant powder paint mustard green, red or black rubber 3/5 mesh granule rubber parts being pressed under high temperature and high pressure with special adhesives. Under no condition may rubber clippings in the form of thin-long rasps be allowed to be contained within the material.
- Rubber material should not be broken when folded completely or its pores be opened, and it should have elasticity that allows easy rolling.